Saving The Tests With Teq-Link; Teq-Link Function Configuration - Dover Vsg Rav.td808 Übersetzung Der Originalanleitung

TABLE OF
CONTENTS

7.19 SAVING THE TESTS WITH TEQ-LINK

At the end of the test, it is possible to save the report with the results and all the vehicle data using the "TEq-Link" function.
It is necessary to install the "TEq-Link Web Manager" software on a Personal Computer connected to the workshop computer network
(see the TEq-Link function configuration manual cod. M0215) and to connect the PC of the equipment to the same data structure.
NOTE: It is necessary to request authorisation for this function from the manufacturer in advance, by providing your licence number,
and to configure the equipment PC with the details of the PC where the "TEq-Link Web Manager" software is installed.
After the test, when entering the customer data (Para. 7.17), it is possible to save the test results using the "Blue" key (Para. 7.19).
When the tests carried out are stored, their results are immediately accessible from any PC or mobile device in the network.
7.19.1

TEq-Link function configuration

Before saving the test with the TEq-Link functionality, it is necessary to insert the references of the PC where the "TEq-Link Web
Manager" software is installed.
From the system configuration menu (Para. 7.2) access the "Application configuration" / "TEq-Link connection" settings, then enter
the IP address of the PC on which the "TEq-Link Web Manager" software is installed.
For further details, see the TEq-Link functions configuration manual (cod. M0215, paragraph 3.2).
At this stage, from any PC or mobile device in the same network, by simply entering the IP or the name of the PC with the SW "TEqLink
Web Manager" in the address bar of the browser, you can access the main page to manage the saved tests as shown in the figure
below.
Using any PC or mobile device in the same
network, by simply entering the IP in the browser
address bar. (A) or the name of the PC with the
"TEqLink Web Manager" software, the main page
for managing the saved tests opens (B).
EN-72 2015-M362-0
RAV.TD808-RAV.TD806 / ROT.SP808-ROT.SP806 / SPA.ART98-SPA.ART86
A
B