Dover VSG RAV.TD808 Übersetzung Der Originalanleitung Seite 147

TABLE OF
CONTENTS
• If possible and necessary, adjust the rear thrust angle.
• Press F4 to continue.
• With F3, it is possible to increase and decrease the partial
toe values, as well as to display the total toe and camber.
• Press F4 to continue.
• Adjust the front axle, the caster, the camber and the toe
where possible and necessary.
• Press F4 to continue.
• Press F2 to repeat the steering procedure or F1 to go back
to the rear adjustment step.
• Turn the steering wheel until the wheels are aligned, i.e. until
the display level appears perfectly centred.
• Adjust the front sensor heads again (mounted on the 1st
steering axle) until they are level and brake them with the
appropriate knobs.
• Wait for the next page to be displayed automatically.
• Move the front sensor heads from the 1st steering axle to
the 2nd steering axle, press F4 to continue.
• Important: hold the steering wheel and/or the steering box
still.
• Note: The steering procedure for this axle can be skipped by
pressing F2, or all other axles can be skipped by going directly
to the final results page by pressing F3.
RAV.TD808-RAV.TD806 / ROT.SP808-ROT.SP806 / SPA.ART98-SPA.ART86
2015-M362-0 EN-65