Jack-Hold" Procedure - Dover Vsg Rav.td808 Übersetzung Der Originalanleitung

TABLE OF
CONTENTS
7.14.2

"Jack-Hold" procedure

Follow the visual instructions that appear on the screen.
Raise the vehicle.
When the adjustment is complete:
RAV.TD808-RAV.TD806 / ROT.SP808-ROT.SP806 / SPA.ART98-SPA.ART86
Tap this key during the adjustment (Para. 7.13 and 7.14) to run the "Jack-Hold" procedure, adjustment
with wheels raised.
With the vehicle raised, tap this key to confirm lifting.
With the vehicle raised it is now possible to perform adjustment.
Tap this key to switch from rear adjustment to front adjustment and vice versa.
This icon is present when the vehicle is raised.
At the end of adjustment, tap the key to lower the vehicle.
Tap this key to switch between rear and front and vice versa.
Tap this key to lower the vehicle.
Tap this key to check that it is correctly positioned on the indicators for the turn radius/rear steering
plates.
2015-M362-0 EN-45