Dover VSG RAV.TD808 Übersetzung Der Originalanleitung Seite 118

TABLE OF
RAV.TD808-RAV.TD806 / ROT.SP808-ROT.SP806 / SPA.ART98-SPA.ART86
CONTENTS
Wheel on
which the
procedure
was carried
out.
The image of the front left wheel is accompanied by a tick, indicating that for that wheel, the procedure is complete. The procedure
can nonetheless be repeated by pressing the central key of the sensor head in question again. When the run-out has been performed
on all wheels, the program automatically proceeds to the next step.
NOTE:
the various stages can be followed by monitoring the red LED on the keypad for each sensor head:
the red LED flashes when the wheel needs to be rotated; the red LED goes out when one of the points is being sampled; the red LED
is on steady when the procedure is completed.
In the system configuration, it is possible to define that the procedure needs to be performed on 3 points instead of 2, in which case
the wheel is rotated 3 times by 120° instead of 2 times by 180° as explained above.
EN-36 2015-M362-0