Components Supplied; Steering Lock - Dover Vsg Rav.td808 Übersetzung Der Originalanleitung

TABLE OF
CONTENTS
3.4

COMPONENTS SUPPLIED

1
2
3
5
MONITOR. There is a 24"16/9 high definition colour monitor.
1
The instructions on use and maintenance are shown in the manual supplied with the same; follow the instructions indicated in it.
2 PC KEYPAD. The equipment is equipped with a 102-key PC-type control keypad
3 CHARGING DOCKS. Where the sensors are located (Para. 3.6.1).
CENTRAL COMPARTMENT FOR PRINTER HOUSING. The results are printed with a colour inkjet printer for A4 size sheets. The instruc-
4
tions on the use and maintenance of the printer are provided in the manual supplied with the printer; follow the instructions indicated in it.
MEASURING CABINET
10 9
5 For all operations relating to the taking of measurements, the measuring cabinet is used, which is equipped with electronic components
for the processing and management of measurements from the sensors.
MANAGEMENT PC HOUSING
6
Accessible from the rear panel. For PC specifications see para. 3.5.
7 MAIN EQUIPMENT SWITCH (on rear panel)
POWER SUPPLY OUTLET
8
Power supply: 1/N/PE 220 - 240 V AC, maximum current 3.15A (approximately 693W) 50/60 Hz
The equipment is equipped with two protection fuses, one on the neutral.
The fuses are inside the side-mounted power socket.
Use only T 3.15A L - 250V AC compliant fuses.
EN-10 2015-M362-0
RAV.TD808-RAV.TD806 / ROT.SP808-ROT.SP806 / SPA.ART98-SPA.ART86
11 10
8 7
PEDAL DEPRESSOR
It is a tool used to lock the brake pedal when preparing for measurement. It is to be used as
shown in the instructions that appear during the program.

STEERING LOCK

It is a tool used to hold the steering in a fixed position. It is used before the adjustment
procedure as shown in the instructions that appear during the program.
RAV.TD808
4
9 8
GRUPPO
-
MATERIALE FORMA
-
DESCRIZIONE
DOCUMENTO DI PROPRIETA' DI VEHICLE SERVICE GROUP ITALY S.r.l. OGNI USO, RIPRODUZIONE E DIFFUSIONE DEVE ESSERE AUTORIZZATA
6 5
6
8
7 6
EM / MOD N° DATA DISEGNATO DA APPROVATO DA
LFisichella -
- 21/03/2024
TAVOLA NOTE:
-
2
TRATTAMENTO FINITURA :
-
-
MATERIALE COMPOSIZIONE CHIMICA
RAV,TD808,700209 RAV,TD808,700414
RAV,TD808,700513 RAV,TD808,700551
4 3
FORM A2
H
G
F
E
D
C
7
EM / MOD N°
-
TAVOLA
2
GRUPPO TRATTAMENTO
- -
MATERIALE FORMA
-
B
RAV,TD808,700
DESCRIZIONE
RAV,TD808,700
DOCUMENTO DI PROPRIETA' DI VEHIC
5 4
FORM A2
SCALA:
1: 1
MASSA .
CLASSE
0,00 g
-
A A
SOSTITUISCE IL :
-
I.A.
CODICE
Figurino
2 1