Dover VSG RAV.TD808 Übersetzung Der Originalanleitung Seite 151

TABLE OF
CONTENTS
• Change the selected number of axles by pressing F2 to select
the image indicating the adjustable draw bar.
• Press F4 to continue.
• A screen appears with the measurements and tolerances
provided by the manufacturer. The data indicated refers to
the 1st and last axles.
• Tap the axle in the silhouette in the top left corner to view
the relative data.
• Press F4 to continue.
• Lock the plates.
• Install the clamps.
• Mount the front sensor heads on the 1st front axle.
• Mount the rear sensor heads on the rear axle.
• (the front sensors are normally illustrated in BLUE, the rear
ones in red).
• Press F4 to continue.
• Rotate the draw bar until the wheels of the 1st front axle are
aligned, i.e. until the display level appears perfectly centred.
• Adjust the sensor heads until they are level and brake them
with the appropriate knobs.
• Wait for the next page to be displayed automatically.
• If possible and necessary, adjust the rear thrust angle.
• Press F4 to continue.
RAV.TD808-RAV.TD806 / ROT.SP808-ROT.SP806 / SPA.ART98-SPA.ART86
2015-M362-0 EN-69