Dover VSG RAV.TD808 Übersetzung Der Originalanleitung Seite 139

TABLE OF
CONTENTS
• Turn the steering wheel until the wheels are aligned, i.e. until
the display level appears perfectly centred.
• Adjust the front sensor heads until they are level and brake
them with the appropriate knobs.
• Wait for the next page to be displayed automatically.
• Perform the steering procedure following the indicator on
the screen, first to the left, then to the right, and lastly at the
centre.
The steering procedure can also be skipped by pressing F4; in
this case, the caster data will not appear.
• Centre the steering wheel and/or centre the steering box.
• Mount the steering support with the special tool.
• Wait for the next page to be displayed automatically or press
F4 to continue.
If possible and necessary, adjust the rear thrust angle.
Note: on this page and on all pages where the adjustable angles
are indicated, tap "Ins" to display the table shown below, which
determines the thickness to be entered as the angle changes.
• Press F4 to continue.
• Make a note of the thicknesses and press F1 to go back to
the previous page.
RAV.TD808-RAV.TD806 / ROT.SP808-ROT.SP806 / SPA.ART98-SPA.ART86
2015-M362-0 EN-57