Dover VSG RAV.TD808 Übersetzung Der Originalanleitung Seite 148

TABLE OF
CONTENTS
• Adjust the front sensor heads (mounted on the 2nd steering
axle) until they are level and brake them with the appropriate
knobs. Leave the rear sensor heads in their position.
• Wait for the next page to be displayed automatically.
• Perform the steering procedure of the 2nd steering axle
following the indicator on the screen, first to the left, then to
the right, and lastly at the centre.
• The steering procedure can also be skipped by pressing F4;
in this case, the toe data will not appear.
• Adjust the 2nd front steering axle, the caster and the camber
where possible and necessary.
• Press F4 to continue.
• Press F1 to go back to the rear adjustment step.
• Press F1 to go back to the rear steering procedure.
• Move the front sensor heads from the 2nd steering axle to
the 1st steering axle, press F4 to continue.
• Turn the steering wheel until the wheels are aligned, i.e. until
the display level appears perfectly centred.
• Adjust the front sensor heads again (mounted on the 1st
steering axle) until they are level and brake them with the
appropriate knobs.
• Wait for the next page to be displayed automatically.
EN-66 2015-M362-0
RAV.TD808-RAV.TD806 / ROT.SP808-ROT.SP806 / SPA.ART98-SPA.ART86