Display Of Additional Measurements On Ride Heights - Dover Vsg Rav.td808 Übersetzung Der Originalanleitung

TABLE OF
CONTENTS
Tap this key to display a single
column of consistent values
for the left and right sides.
F4
The PC with the SW contains technical, vehicle-related information from official databases. Access to the system and information is
subject to the reading and acceptance of a Disclaimer, which is shown on the device the first time the SW is used.
7.5.1

Display of ADDITIONAL MEASUREMENTS on RIDE HEIGHTS

Some manufacturers (for example: Mercedes, Renault) provide angle tolerance values based on certain measurements on the vehicle
chassis.
1
The programme displays a page as in the example below; use the symbols (2) to display the different images.
2
RAV.TD808-RAV.TD806 / ROT.SP808-ROT.SP806 / SPA.ART98-SPA.ART86
Tap this key to continue with the preliminary operations on the vehicle.
When the selected vehicle has angle tolerance values linked to additional measurements on the chassis,
key (1) is present on the technical data page.
Tap this key to view the page with details of the chassis measurements.
2015-M362-0 EN-29