System Configuration; Print Menu; Additional Features; Database Configuration - Dover Vsg Rav.td808 Übersetzung Der Originalanleitung

TABLE OF
CONTENTS
Menu Description

SYSTEM CONFIGURATION

It is possible to change the system parameters: customise the vehicle database, by selecting which "groups"
to show, or create new groups or modify existing ones by adding or removing makes; specify which components
are included in the supply and their type; perform a Bluetooth search to pair the sensor heads with the PC.

PRINT MENU

It is possible to customise printouts by entering the workshop data, choose the desired print type and select
the default printer (if more than one printer is connected).
BACKUP / RECOVERY
To avoid the risk of losing data in the vehicle and customer database, it is advisable to create a backup copy
(save). A USB "flash disk" is used for this operation.
It is possible to recover lost or deleted data with the recovery procedure, if the backup operation has been
performed.
Database management (para. 7.2).

ADDITIONAL FEATURES

It is possible to access the TEST or Calibration applications of the sensors (reserved for specialist, authorised
personnel)
7.3

DATABASE CONFIGURATION

The screen shows the databases present and their version.
It shows the licence number, corresponding to the equipment's serial number, which must be communicated to the Manufacturer to
purchase a new database.
F2
EN-26 2015-M362-0
RAV.TD808-RAV.TD806 / ROT.SP808-ROT.SP806 / SPA.ART98-SPA.ART86
Where present, tap this key to go back to the "System configuration menu".
From the "Configuration menu" page (para. 7.2), tap this key to access the configuration page.
On this page it is possible to view information on existing databases and check for new program
updates.
By tapping this key, it is possible to check for the presence of new program updates or the availability
of new database releases.