Vehicle Diagnosis; Preparing For Adjustment - Dover Vsg Rav.td808 Übersetzung Der Originalanleitung

TABLE OF
CONTENTS

7.11 VEHICLE DIAGNOSIS

Once the steering procedure is complete (Para. 7.10), a page appears showing a summary of the measurements made.
The part on the left shows the factory reference values, on the right the diagnosis measurements are shown; the values are highlighted
in green if in tolerance, in red if outside the tolerance, in grey if the tolerances are not present.
Reference factory
values

7.12 PREPARING FOR ADJUSTMENT

Follow the directions that appear on the device to prepare for adjustment.
1. Centre the steering
wheel.
2. Mount the steering
holder with the
appropriate tool and
proceed
RAV.TD808-RAV.TD806 / ROT.SP808-ROT.SP806 / SPA.ART98-SPA.ART86
Tap this key to go back to the steering procedure (Para. 7.10).
Tap this key to display the technical data of the selected vehicle (the model can be changed if it is
different).
Tap this key to display and print the diagnosis measurements.
Tap this key to continue with preparation for the adjustment (Para. 7.12).
Tap this key on the diagnosis measurement summary page (Para. 7.15), a page appears showing the
preparation for adjustment.
Tap this key to continue with adjustment of the rear axle (Para. 7.13).
Diagnosis measure-
ments highlighted.
2015-M362-0 EN-41