Diagnosis And Adjustment Data Summary; Chassis Diagnosis - Dover Vsg Rav.td808 Übersetzung Der Originalanleitung

TABLE OF
CONTENTS

7.15 DIAGNOSIS AND ADJUSTMENT DATA SUMMARY

Summary of diagnosis
data
7.15.1

Chassis diagnosis

This measurement is made during vehicle alignment (Para. 7.9). Differences in wheelbase and track width and front axle setback are
displayed on this page.
RAV.TD808-RAV.TD806 / ROT.SP808-ROT.SP806 / SPA.ART98-SPA.ART86
When front adjustment on the vehicle is complete and after tapping this key, the following screen
appears with the Diagnosis and Adjustment data summary
Tap this key; the program will open the auxiliary options menu (Para. 7.16).
Tap this key to display the technical data of the selected vehicle (the model can be changed if it is
different).
Tap this key; the program opens the "Test Drive" procedure (Para. 7.15.2)
Tap this key; the programme switches to the vehicle and customer data input stage where the tests
can be printed and saved (see also Saving "TEq-Link" - Para. 7.19).
Tap this key to go back to the rear adjustment step (Para. 7.13).
Tap this key on the Diagnosis summary page and on the Diagnosis and Adjustment summary page; a
graphic-geometric representation of the vehicle axes currently being worked on is displayed.
Tap this key; the program will allow printing of the "Chassis Diagnosis" measurements.
Tap this key to exit and go back to the previous step.
Summary of adjustments
made
2015-M362-0 EN-47