Herunterladen Inhalt Inhalt Diese Seite drucken

Spoke Protectors; Lap Belt - Ottobock Avantgarde XXL 2 Gebrauchsanweisung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Options
5.13 Spoke protectors (Fig. 38)
Protects the fingers from getting caught in the wheel spokes. Also improves the appearance of
the wheelchair.
5.14 Lap belt (Abb. 39/40)
INFORMATION
Incorrectly adjusted safety belt. Incorrect user posture, illness, falling of the user due to installation/
adjustment errors
• Do not modify the settings established by the qualified personnel. In case of problems with the adjust-
ments (unsatisfactory sitting position) please contact the qualified personnel who fitted the product.
• The lap belt has to fit closely but not too tightly so the user is not injured. Sliding two fingers comfor-
tably between the belt and thigh should be possible.
• Have the settings of the belt system checked regularly. Adjustments may be required due to the growth
of the user or because of changes in the course of the disease or different clothing.
The lap belt prevents the user from slipping and supports positioning.
It is installed on the product by qualified personnel if needed and adapted to the requirements
of the user. Information about subsequent acquisition and mounting is provided by the qualified
personnel that handed over the product.
Using the lap belt
1. Unfasten the strap by means of the metal snap/buckle.
2. Place the user in an upright, 90° seated position (if physiologically possible). Ensure that the
back is up against the backrest padding (if physiologically possible).
3. Fasten the belt by means of the metal snap or buckle.
4. The lap belt should be at an angle of about 60° to the seat surface. The belt strap should run
across the thighs in front of the pelvic bones (see fig. 2).
Possible errors
• The lap belt is positioned above the pelvis of the user in the area of the soft part of the stomach.
• The user does not sit upright in the seat.
• If the lap belt is too loose, the user can shift/slide out to the front.
• During the installation/adjustment, the safety belt is led over parts of the seating system (for
instance over armrests or seat pads). This causes the lap belt to lose its retaining function.
64 | Ottobock
38
Avantgarde XXL 2

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis