RK Rose+Krieger RK MultiControl II duo Montageanleitung Seite 124

124
Figure 20 - Drive group management
As soon as the drive group management function is active, it can be deactivated
via the "Control"
(password available upon request). Resetting to factory settings also resets the
group configuration.
Individually moving drive groups
In order to individually move the drive groups, activate the corresponding drive
group using function keys 1 or 2. The hand switch's display inversely shows the
selection. You can deactivate the drive groups in the same manner.
The activated drive group can now be moved accordingly using the "UP" and
"DOWN" keys.
Press the "F'" key in order to absolutely or relatively position the active drive
group (see chapters 6.5.7.1 and 6.5.7.2). Pressing the "F" key again takes you
back to the main view.
You can switch to the memory position of the activated drive group via the
"Hand switch" → "Premium functions" → "Function key settings" → "Memory
position" menu items (see chapter 6.5.5).
MultiControl II duo and MultiControl II quadro assembly instructions
→ "Startup" → "Drive group management" menu item
The "Sync-BUS" function can no longer be activated
when drive group management is activated.
When drive group management is activated, all the
settings under the "Control" menu item are performed
for the respective activated drive group.