Normal Operation - RK Rose+Krieger RK MultiControl II duo Montageanleitung

General:
• General, national and operating safety regulations are to be observed.
• Only persons instructed for this task may operate controls and hand switches.
• Responsibilities for the use of this control must be regulated and observed
unambiguously, so that there cannot be any ill-defined competences with regard to
safety.
• Operation at ambient temperatures between +40 °C and +5 °C. Condensation must
be avoided. No operation outdoors.
Transport and storage:
• Avoid contact with solvent-based paints
• Do not store in an atmosphere containing solvents
• Lowest/highest ambient temperature: -25 °C/+80 °C
• Relative humidity in storage: avoid condensation
Installation:
• Do not modify the controls
• Only connect suitable drives
• Avoid crushing and shearing points

Normal operation:

• Before putting into operation each time, the user must be sure that no persons or
objects are in the drives' danger area.
• Maintain the duty cycle (DC) of the control and drives.
• Avoid overloading the drives.
Maintenance:
• Perform the annual safety-related inspection according to DGUV (German Social
Accident Insurance) V3.
• Do not use cleaning agents containing solvents.
82 MultiControl II duo and MultiControl II quadro assembly instructions