Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

120
The sensitivity that SPP can achieve depends on the entire system. A useful
detection threshold can only be determined in end use. A detection threshold
greater than 0 mA must be defined for both directions of travel.
Physical limitations meant that the SPP is significantly less sensitive in the direction
of force than against the direction of force. One example is when lifting loads.
This behaviour can be improved by configuring the collision direction using
parameter 99 (see 6.5.6.14) in the direction of force and increasing the detection
sensitivity. However, doing so only makes sense in systems, in which the collision
risk is only present in one direction.
To deactivate collision detection, select the "Control" → "Stop functions" →
"Collision detection (SPP)" menu item. Now, via the "Extend" → menu item,
select "Deactivate" and, via the "Retract" menu item →, select "Deactivate".
Alternatively, you can configure a detection threshold of 0 mA during extension
and retraction via the "Control" → "Stop functions" → "Collision detection"
(SPP)" menu item.
6.5.7.4

Key lock

The Premium version of the drive control has a key lock. It is deactivated in the
delivery state. It can be activated in two different ways.
• Manually:
Open the "Hand switch" menu item. Select the "Key lock" menu item
and activate the key lock by selecting and confirming the "Manual"
menu item.
-›› Now the key lock can be activated at any time by pressing and holding
the "F" key for five seconds.
• Time-controlled:
Open the "Hand switch" menu item. Select the "Key lock" menu
item and activate the key lock by selecting and confirming the "Time-
controlled" menu item.
Otherwise, the key lock can be activated in a time-controlled manner in
five, ten or, 30 minute intervals.
The key lock is unlocked by pressing and holding the "DOWN" key for five
seconds.
MultiControl II duo and MultiControl II quadro assembly instructions

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Rk multicontrol ii quadro

Inhaltsverzeichnis