the 1 cup button for the shot, because as a factory default, the correct extraction
volume is pre-programmed already for this button.
•
2 Cups filter basket: Use this one for extracting a double shot. The 2 cups button
delivers the correct extraction volume (approx. 60ml) as a default. You should
fill in 10-16g coffee powder for getting the optimum results.
•
POD filter basket: This particular filter basket is designed for extracting coffee
pads. The special design of the filter mesh ensures that the water flows evenly.
Only place one single coffee pad into the POD filter basket.
NOTE
The pre-programmed extraction volume can be changed according to your likings,
when the factory settings are not sufficient (see: 'Changing the Default Settings /
Adjusting the Extraction Volume'). However, when finding out that this way did not
lead to your desired results, the factory values can be restored (see: 'Changing the
Default Settings / Recalling the Factory Settings').
ADJUSTABLE, AUTOMATICALLY CONTROLLED GRINDER
The »Design Espresso Advanced Barista« is equipped with a program-controlled grin-
der. It is best to use this feature for grinding fresh, whole coffee beans just before
the extraction. Additionally, the grinder substitutes the usage of a measuring spoon
by giving off the correct dose automatically. The handling is as easy as could be:
simply insert the prepared and pre-warmed portafilter into the grinder cradle and
start operation via the grinder button. The grinder features the following properties:
•
The bean hopper holds stocks of approx. 220g coffee beans.
•
The grind size can be adjusted via the grind size dial.
•
Pre-programmed amount of coffee powder: the amount given off is controlled
automatically. Each time you start the grinder, you will get the correct amount.
•
The pre-programmed factory settings can be adjusted individually in a wide
range. Your new settings are kept in memory even after cutting off the power
supply.
•
Separately programmable settings for 1 espresso and 2 espressi.
EN
96