Gastroback Design Espresso Advanced Barista Bedienungsanleitung Seite 89

of your mains power supply corresponds to the voltage requirements of
the appliance (220 - 240 V, 50 - 60 Hz, AC, rated for at least 16 A). The
power outlet socket must be installed separately from other power outlet
sockets to avoid interference with other appliances.
The installation of a residual current operated circuit breaker (r.c.c.d.)
with a maximum rated residual operating current of 30 mA in the supp-
lying electrical circuit is strongly recommended. If in doubt, contact your
electrician for further information.
• In various foreign countries, the specifications for power supplies are
subject to incompatible norms. Therefore it is possible that power sup-
plies in foreign countries do not meet the requirements for safe opera-
tion of the appliance. Thus, before operating the appliance abroad,
ensure that safe operation is possible.
• Do not use any desk top multi socket outlet, external switching device,
or remote control systems, or extension cord to avoid risk of fire or
electric shock. Ensure that the power outlet socket used is always
accessible for unplugging the appliance immediately in case of mal-
function or danger.
• The appliance may not be operated on metal surfaces (e.g. sink) to
avoid risk of electric shock. Do not touch the power plug or the appli-
ance with wet hands, when the appliance is connected to the power
supply.
• DO NOT pour or spill any liquids on or under the housing of the appli-
ance or the power cord. Do not overfill the water tank (max. 2.5 litres,
2500 ml; MAX filling line). Otherwise, water could run out and cau-
se hazards due to overheating, fire and electric shock. Always wipe
off spilled liquids immediately. If liquids run out or are spilled on the
housing, immediately unplug the appliance. Do not immerse the appli-
ance, power cord, or power plug in water or other liquids. Do not
place the appliance on wet surfaces. When liquids are spilled on the
power cord or operating elements (console, selection dial, or grind
size dial) or accumulate under the appliance, immediately unplug the
appliance. Thereafter, dry the appliance and let it dry naturally for at
least 1 day. If in doubt, carefully check the appliance for leakage.
EN
89