Changing The 'Ready' Signal Volume; Advanced Features; Adjusting The Grinder - Gastroback 42720 Design Coffee Grind & Brew Advanced Pro Bedienungsanleitung

4. Rotate the STRENGTH button to set the current clock time.
5. Press the STRENGTH button to confirm. The coffee brewer will now automatically
start the brew cycle at the time you've set.
6. Ensure to check the following items:
Fill a sufficient amount of water in the water tank.
Select the number of cups you wish to brew.
Set the strength.
Fill the bean hopper with fresh beans.
Insert a fresh filter paper in the coffee basket and close the swing-out door.
Place the clean, empty carafe under the coffee basket.
Note:
The Auto Start feature has been activated only, if 'AUTO START ON' appears
on the LCD screen. To cancel the Auto On after it has been set, press the AUTO
START button once. The Auto Start feature must be selected again, each time you
want to pre-schedule a brew. Press the AUTO START button and the currently pro-
grammed Auto Start time will appear on the LCD screen.
CHANGING THE SIGNAL VOLUME
The volume of the acoustic signals can be changed to suit your preference. There
are 3 options: high, low and off.
1. Press the MENU | EXIT button.
2. Rotate the STRENGTH dial to SOUND.
3. Press the STRENGTH dial to select SOUND. SOUND and the current setting will
be displayed, flashing.
4. Rotate the STRENGTH dial to select your setting.
5. Press the STRENGTH dial to confirm. The coffee brewer will beep to confirm.
6. The LCD will show the main screen.

ADVANCED FEATURES

Your Design Coffee Grind & Brew Advanced Pro is equipped with some advanced
features that usually only need to be used occasionally. These are outlined below.

ADJUSTING THE GRINDER

Your new coffee brewer is fitted with adjustable stainless steel burrs. These flat burrs
deliver a coffee particle of optimum size for drip filter brewing. You may need to
77