1X500 And 3X500 Paper Deck Trays; Figure 2-24 Test The Tray 4 Door Switch - HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung

1x500 and 3x500 paper deck trays

Tray 4 paper sensor (SR3)
See Tray 4 paper sensor (SR3) on page
Tray 4 paper surface sensor (SR2)
See Tray 4 paper surface (SR2) on page
Tray 4 paper size switches (SW2, SW3)
See Tray 4 paper size switches (SW2, SW3) on page
Tray 4 feed sensor (SR1)
See Tray 4 Feed sensor (SR1) on page
Tray 4 door opening/closing door switch (SW1)
NOTE: Tray 4, Tray 5, and Tray 6 use the same door switch (SW1).
1.
Open and then close the paper-feeder door to ensure that the tab on the door (callout 1) activates
the switch (callout 2).
Figure 2-24
2. Check the control-panel display for sensor response.
3. If no response, replace the button switch.
136 Chapter 2 Solve problems
131.
132.
134.
Test the Tray 4 door switch
2
133.
1
ENWW