Table 2-50
Resistance Mode
Humidity Mode
Table 2-51
Line Detail
Environment
Restore Optimize
ENWW
Print modes under the Adjust Paper Types sub menu (continued)
MP modes under the Optimize submenu
Set to Up to resolve print-quality issues caused by poor
secondary transfer in low-humidity environments with resistive
or rough surface paper.
With glossy film, set to High when the product is in a high-
humidity environment and print-quality defects occur on HP
Tough Paper or Opaque film.
With transparencies, set to High when the product is in a
high-humidity environment and print-quality defects occur on
color transparencies on the first page of a print job.
With all other paper types, set to High when the product is in
a high-humidity environment and light density occurs on the
first page of a print job.
Normal
Up
Off
Set to Low Temp if the product is operating in a low-
temperature environment and you are having problems with
print quality such as blisters in the printed image.
Use this item to reset the menu defaults.
Use manual print modes
279