Format Disk And Partial Clean Functions; Active And Repository Firmware Locations; Partial Clean - HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung

Format Disk and Partial Clean functions

Active and repository firmware locations

The firmware bundle consists of multiple parts. The main components are the Windows CE Operating
System and the product/peripheral firmware files.
There are two locations/partitions on the hard drive where the firmware components are stored:
The Active – where the Operating System and firmware currently are executing
●
The Repository – the recovery location
●
If the Active location is damaged, or a 3 Partial Clean was performed, the product automatically
copies over the OS and firmware files from the Repository location and the product recovers.
If both the Active and Repository locations are damaged, or a 2 Format Disk was performed, then
both locations are gone and the error message 99.09.67 displays on the control-panel display. The
user must upload the firmware to the product in order for it to function again.
CAUTION:
operating system, firmware files, and third party files (among other files) will be completely lost. HP
does not recommend this action with out first contacting support.

Partial Clean

The 3 Partial Clean option erases all partitions and data on the disk drive, except for the firmware
repository where a backup copy of the firmware file is stored. This allows the disk drive to be
reformatted without having to download a firmware upgrade file to return the product to a bootable
state.
Characteristics of a partial clean
Customer-defined settings, third-party solutions, firmware files, and the operating system are
●
deleted.
Rebooting the product restores the firmware files from the Repository location, but does not restore
●
any customer-defined settings.
For previous HP products, a Hard Disk Initialization is similar to executing the 3 Partial Clean
●
function for this product.
CAUTION:
Clean if you need to retain customer-defined settings. See the Backup/Restore item in the Device
Maintenance menu.
Reasons for performing partial clean
The product continually boots up in an error state.
●
NOTE:
The product will not respond to commands from the control panel.
●
296 Chapter 2 Solve problems
The 2 Format Disk option performs a disk initialization for the entire disk. The
HP recommends backing-up product configuration data before executing a 3 Partial
Try clearing the error prior to executing a 3 Partial Clean.
ENWW