59.05.60 Error To Continue Turn Off Then On; 60.00.0Y Tray Lifting Error; 62.00.00 No System To Continue Turn Off Then On - HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung

Recommended action
1. Perform the drum-motor component test in the Troubleshooting menu.
2.
Use the disable toner cartridge check and run the drum motor component test with the toner
cartridge removed. If the test passes, replace the toner cartridge. If the test fails, replace the drum
motor.
3.
If the product was previously serviced, check the connector at the drum motor assembly and the
DC controller. See the circuit diagram for details.

59.05.60 Error To continue turn off then on

Description
The product experienced a drum motor rotation error.
Recommended action
1. Perform the drum-motor component test in the Troubleshooting menu.
2.
Use the disable toner cartridge check and run the drum motor component test with the toner
cartridge removed. If the test passes, replace the toner cartridge. If the test fails, replace the drum
motor.
3.
If the product was previously serviced, check the connector at the drum motor assembly and the
DC controller. See the circuit diagram for details.
60.00.0Y Tray <Y> lifting error
Description
The indicated tray has not lifted into the paper feed position.
Recommended action
60.00.11: Lifter motor failure (M7)
1.
Turn the product off and then on.
2.
Check the connector (J51) on the DC controller PCA.
3.
Check the connectors on the lifter motors.
4. Use the tray lifter sensor test in the Tray/ Bin manual sensor test menu to verify that the
sensor is properly functioning. If it is not, replace the lifter drive assembly.
5.
If the error persists, replace the lifter drive assembly.

62.00.00 No system To continue turn off then on

Description
The product experienced an internal system failure.
230 Chapter 2 Solve problems ENWW