Figure 2-20 Tray 4 Paper Surface Sensor - HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung

Tray 4 paper surface (SR2)
1. Remove Tray 4, and then press the sensor lever in the back right corner of the tray cavity to
activate the sensor.
Figure 2-20
2. Check the control-panel display for sensor response.
3. If there is no response, replace the optional 500-sheet feeder.
132 Chapter 2 Solve problems
Tray 4 paper surface sensor
ENWW