57.00.0X Error
Description
A fan error has occurred.
Recommended action
57.00.01: Fan motor 1 (rear) malfunction
1.
Turn the product off and then on. Listen for fan noise at the rear of the product. If no noise is
heard, replace the power supply fan (FM1).
2.
If this part has been removed or replaced, check the connector (J33) on the DC controller PCA.
57.00.02: Fan motor 2 (front) malfunction
1.
Turn the product off and then on. Listen for fan noise at the front of the product. If no noise is
heard, replace the toner cartridge fan (FM2).
2.
If this part has been removed or replaced, check the connector (J37) on the DC controller.
57.00.03: Fan motor 3 (fuser) malfunction
1.
Turn the product off and then on. Listen for fan noise at the lower back-center of the product. If no
noise is heard, replace the fuser fan (FM3).
2.
If this part has been removed or replaced, check the connector J37 on the DCC.
58.00.04 Error To continue turn off then on
Description
The low-voltage power supply is defective.
Recommended action
1.
Turn the product off and then on.
2.
Check the connectors (J31 and J32) on the DC controller PCA.
3.
If the error persists, replace the low voltage power supply.
59.00.00 Error To continue turn off then on
Description
A paper path malfunction error has occurred.
Recommended action
Turn the product off then on.
228
Chapter 2 Solve problems
ENWW