Display Settings Menu - HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung

Table 2-41 Default Print Options menu (continued)
First level
Default Paper Size
Default Custom Paper Size
Sides
2-Sided Format
Edge-to-Edge

Display Settings menu

To display: At the product control panel, open the Administration menu, and then open the
Display Settings menu.
ENWW
Second level
inches
mm
Values
Select from a list of sizes that the
product supports.
X Dimension
Y Dimension
1-sided*
2-sided
Book-style*
Flip-style
Normal (recommended)*
Edge-to-Edge output
Description
Configures the default paper size
used for print jobs.
Configures the default paper size
that is used when the user selects
Custom as the paper size for a
print job.
X dimension range: 3-8.5 in
X dimension default = 8.5 in
Y dimension range: 5-14 in
Y dimension default = 14 in
Use to indicate whether the
original document is printed on
one or both sides, and whether
the copies should be printed on
one or both sides. For example,
select the 1-sided original, 2-
sided output option when the
original is printed on one side,
but you want to make two-sided
copies.
Select the Orientation setting
to specify portrait or landscape
orientation and to select the way
the second sides are printed.
Configures the default style for 2-
sided print jobs. If the Book-
style option is selected, the
back side of the page is printed
the right way up. This option is
for print jobs that are bound
along the left edge. If the Flip-
style option is selected, the
back side of the page is printed
upside-down. This option is for
print jobs that are bound along
the top edge.
Use to avoid shadows that can
appear along the edges of
copies when the original
document is printed close to the
edges.
Tools for troubleshooting
189