Table 2-2 Preboot Menu Options (2 Of 6) - HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung

Table 2-2 Preboot menu options (2 of 6)
Menu option
3 Administrator
continued
92 Chapter 2 Solve problems
First level Second level
6 Manage 1 Clear disk
Disk
2 Lock Disk
3 Leave
Unlocked
4 Clear Disk
Pwd
5 Retain
Password
6 Boot Device
Third level Description
Select the 1 Clear disk item to enable an external device
for job storage. Job storage is normally enabled only for the
Boot device. This will be grayed out unless the 99.09.68
error is displayed.
Select the 2 Lock Disk item to lock (mate) a new secure
disk to this product.
The secure disk already locked to this product will remain
accessible to this product. Use this function to have more
then one encrypted disk accessible by the product when
using them interchangeably.
The data stored on the secure disk locked to this product
always remains accessible to this product.
Select the 3 Leave Unlocked item to use a new secure
disk in an unlocked mode for single service event. The
secure disk that is already locked to this product will remain
accessible to this product and uses the old disk's encryption
password with the new disk.
The secure disk that is already locked to this product remains
accessible to this product.
Select the 4 Clear Disk Pwd item to continue using the
non-secure disk and clear the password associated with the
yet to be installed secure disk.
CAUTION:
permanently inaccessible.
Select the 5 Retain Password item to use the non-secure
disk for this session only, and then search for the missing
secure disk in future sessions.
1 Secure Select the 1 Secure Erase item to erase all of the data on
Erase
the disk and unlock it if required.
This might take a long time.
NOTE:
The system will be unusable until the system files
are reinstalled. ATA secure-erase command one pass over
write. Erases entire disk including firmware. The disk
remains an encrypted disk.
2 Erase/ Select the 2 Erase/Unlock item to cryptographically erase
Unlock all data on disk and unlock the disk to allow access to it
from any product.
NOTE:
The system will be unusable until the system files
are reinstalled. Erases the crypto key. The disk becomes a
non-encrypted disk.
3 Get Status This item provides disk status information if any is available.
Data on the missing secure disk will be
ENWW