Network Settings Menu; Table 2-44 Manage Trays Menu - HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung

Table 2-44 Manage Trays menu (continued)
First level
Alternative Letterhead Mode
Duplex Blank Pages
Override A4/Letter

Network Settings menu

To display: At the product control panel, select the Administration menu, and then select the
Network Settings menu.
In the following table, asterisks (*) indicate the factory default setting.
194 Chapter 2 Solve problems
Values
Disabled*
Enabled
Auto*
Yes
Yes*
No
Description
Use to load letterhead or preprinted paper
into the tray the same way for all print jobs,
whether you are printing to one side of the
sheet or to both sides of the sheet. When this
option is selected, load the paper as you
would for printing on both sides. See the
user documentation that came with the
product for instructions about loading
letterhead for printing on both sides. When
this option is selected, the product speed
slows to the speed required for printing on
both sides.
Control how the product handles two-sided
jobs (duplexing). Two options are available:
Auto: This option enables Smart Duplexing,
which instructs the product not to process
blank pages.
Yes: This option disables Smart Duplexing
and forces the duplexer to flip the sheet of
paper even if it is printed on only one side.
This might be preferable for certain jobs that
use paper types such as letterhead or
prepunched paper.
Prints on letter-size paper when an A4 job is
sent but no A4-size paper is loaded in the
product (or to print on A4 paper when a
letter-size job is sent but no letter-size paper
is loaded). This option will also override A3
with ledger-size paper and ledger with A3-
size paper.
ENWW