Figure 2-26 Tray 4 Paper Surface Sensor; Figure 2-27 Tray 4 Paper Size Sensor - HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung

2.
In the tray cavity, in the upper right-hand corner, toggle the sensor lever.
Figure 2-26
3. Check the control-panel display for sensor response.
4. If there is no response, replace the sensor.
Tray 4 paper size sensor (PS3303)
1.
Remove Tray 4 from the HCI.
2.
In the tray cavity, press and hold the tray presence switch (callout 1), and then lift the paper size
sensor lever (callout 2).
Figure 2-27
ENWW
Tray 4 paper surface sensor
Tray 4 paper size sensor
1
2
Tools for troubleshooting
139