Clean The Product; Print A Cleaning Page - HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung

Clean the product

Over time, particles of toner and paper accumulate inside the product. This can cause print-quality
problems during printing. Cleaning the product eliminates or reduces these problems.
Clean the paper path and print-cartridge areas every time that you change the toner cartridge or
whenever print-quality problems occur. As much as possible, keep the product free from dust and
debris.
To clean the product exterior, use a soft, water-moistened cloth.

Print a cleaning page

Print a cleaning page to remove dust and excess toner from the paper path if you are having any of the
following problems:
Specks of toner are on the printed pages.
●
Toner is smearing on the printed pages.
●
Repeated marks occur on the printed pages.
●
Use the following procedure to print a cleaning page.
1. On the product control panel, press the Home
2.
Open the following menus:
Device Maintenance
●
Calibration/Cleaning
●
Print Cleaning Page
●
3.
The cleaning process can take several minutes. When it is finished, discard the printed page.
ENWW
button.
Clean the product
289