Service Mode Functions; Service Menu - HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung

Service mode functions

Service menu

The Service menu is PIN-protected for added security. Only authorized service people have access to
the Service menu. When you select Service from the list of menus, the product prompts you to type
an eight-digit personal identification number (PIN).
NOTE: The product automatically exits the Service menu after about one minute if no items are
selected or changed.
1.
At the product control panel, press the Home
2. Open the Device Maintenance button.
3. Open the Service menu.
4. Select the Service Access Code option.
5. Enter the following service access code for this product: 11071212, and then press the
OK button.
The following menu items appear in the Service menu:
First level
Print Event Log
View Event Log
Clear Event Log
Cycle Counts
Serial Number
Service ID
ENWW
Second level
Total Engine Cycles
Refurbish Cycle Count
Maintenance Kit Count
Maintenance Kit Interval
button.
Value Description
Allows you to print or view the
product event log.
Use this item to clear the product
event log.
Set the page count that was stored
in NVRAM prior to installing a new
formatter.
Use this item to record the page
count when the product was
refurbished.
Set the serial number.
Use this item to show the date that
the product was first used on the
control panel. This eliminates the
need for users to keep paper
receipts for proof of warranty.
Service mode functions
293