Load Tray : [Type], [Size] To Use Another Tray, Touch "Options; Manually Feed Output Stack Then Touch "Ok" To Print Second Sides - HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung

Recommended action
1.
Load the tray with the requested paper or adjust the paper guides.
2. If the error persists, use the tray paper present sensor test in the Tray/ Bin manual sensor test
to verify that the sensor is correctly functioning.
3.
Make sure that the sensor flag on the paper presence sensor is not damaged and moves freely.
4.
Reconnect the corresponding connector:
Tray 1 (multipurpose tray): Connector (J1) on the Tray 1 paper out sensor and the connector
●
(J41) on the DC controller PCA.
Input trays: Connectors (J15 and J7) on the tray paper out sensor and the connectors (J43,
●
J48) on the DC controller PCA.
1x500-sheet paper feeder tray: Connector (J752) on the paper feeder tray paper out sensor
●
and the connector (J2003) on the paper feeder controller PCA.
3x500-sheet paper feeder tray: Connectors (J752, J852, J952) on the paper feeder tray
●
paper out sensor and the connector (J2003) on the paper feeder controller PCA.
HCI: Connector (J3201) on the paper feeder tray paper out sensor and the connector (J3005
●
or J3015) on the HCI controller PCA.
Load Tray <X>: [Type], [Size] To use another tray, touch "Options"
Description
This message appears when the indicated tray is selected but is not loaded, and other paper trays are
available for use. It also appears when the tray is configured for a different paper type or size than the
print job requires.
Recommended action
1. Load the correct paper in the tray.
2. If prompted, confirm the size and type of paper loaded.
3. Otherwise, press the

Manually feed output stack Then touch "OK" to print second sides

Description
The product has printed the first side of a manual duplex job and is waiting for the user to insert the
output stack to print the second side.
244 Chapter 2 Solve problems
OK button to select another tray.
ENWW