Recommended action
1.
Turn the product off and then on.
2.
Turn the product off, reseat the EIO accessory, and then turn the product on.
3.
If the error persists, replace the formatter.
81.YY.YY EIO Error To continue turn off then on
Description
An external I/O card has failed on the product.
Recommended action
1.
Turn the product off and then on.
2.
Turn the product off, reseat the EIO accessory, and then turn the product on.
3.
If the error persists, replace the EIO card.
98.00.0X Corrupt data in X volume
Description
Data corruption has occurred in the firmware volume.
98.00.01 Corrupt data in firmware volume Reinstall firmware
◦
98.00.02 Corrupt data in solutions volume Re-install accessory solutions
◦
98.00.03 Corrupt data in configuration volume Re-configure the product
◦
98.00.04 Corrupt data in job data volume All job data was erased
◦
Recommended action
98.00.01 or 98.00.02 or 98.00.03
1.
Turn the product off and then on.
2.
Use the 1 Clear disk item in the Preboot menu.
3.
Reload the firmware.
98.00.04
1.
Turn the product off and then on.
2.
Rerun the file erase function.
<Binname> full Remove all paper from bin
Description
The specified output bin is full.
232
Chapter 2 Solve problems
ENWW