Solve Performance Problems - HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung

Solve performance problems

Table 2-53
Problem
Pages print but are totally blank.
Pages print very slowly.
Pages did not print.
290 Chapter 2 Solve problems
Solve performance problems
Cause
The document might contain blank
pages.
The product might be malfunctioning.
Heavier paper types can slow the print
job.
Complex pages can print slowly.
Large batches, narrow paper, and
special paper such as gloss,
transparency, cardstock, and HP Tough
Paper can slow the print job.
The product might not be pulling paper
correctly.
The paper is jamming in the product.
The USB cable might be defective or
incorrectly connected.
Other devices are running on your
computer.
Solution
Check the document that you are
printing to see if content displays on all
of the pages.
To check the product, print a
configuration page.
Print on a different type of paper.
Proper fusing might require a slower
print speed to ensure the best print
quality.
Print in smaller batches, on a different
type of paper, or on a different size of
paper.
Make sure paper is loaded in the tray
correctly.
Clear the jam.
Disconnect the USB cable at both
●
ends and reconnect it.
Try printing a job that has printed
●
in the past.
Try using a different USB cable.
●
The product might not share a USB port.
If you have an external hard drive or
network switchbox that is connected to
the same port as the product, the other
device might be interfering. To connect
and use the product, you must
disconnect the other device or you must
use two USB ports on the computer.
ENWW