21.00.00 Page Too Complex To Continue, Touch "Ok; 33.Wx.yz Used Board/Disk Installed; 40.00.01 Usb I/O Buffer Overflow To Continue, Touch "Ok; 40.00.02 Embedded I/O Buffer Overflow To Continue, Touch "Ok - HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung

21.00.00 Page too complex To continue, touch "OK"

Description
The page decompression process was too slow for the product.
Recommended action
Press the OK

33.WX.YZ Used board/disk installed

Description
An encrypted board or disk with existing data previously locked to a different product has replaced the
original. If you continue, data is permanently lost.
Recommended action
To save the data on the board or disk, turn the product off. Replace the board or disk with another
◦
board or disk.
To delete the data on the board or disk and continue, press the
◦

40.00.01 USB I/O buffer overflow To continue, touch "OK"

Description
The USB buffer overflowed during a busy state.
Recommended action
1. Press the
2. Check the host configuration.

40.00.02 Embedded I/O buffer overflow To continue, touch "OK"

Description
Too much data was sent to the embedded HP Jetdirect print server. An incorrect communications
protocol might be in use.
Recommended action
1. Press the
2. Check the host configuration.
40.00.03 EIO <X> buffer overflow To continue, touch "OK"
Description
The product displays this message when the EIO card in the indicated slot has overflowed its I/O buffer
during a busy state.
214 Chapter 2 Solve problems
button to continue. There may be some data loss.
OK button to print the transferred data. Some data might be lost.
OK button to print the transferred data. Some data might be lost.
OK button.
ENWW