Figure 2-31 Tray Paper Surface Sensor - HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung

3.
Check the control-panel display for sensor response.
4.
If there is no response, replace the sensor.
Tray paper surface sensor (PS3201 and PS3202)
1. Remove Tray 5 from the HCI.
2. At the back of the tray cavity, toggle the sensor lever.
Figure 2-31
3. Check the control-panel display for sensor response.
4. If there is no response, replace the sensor.
Tray 5 paper size sensor (PS3304)
1.
Remove Tray 5 from the HCI.
142 Chapter 2 Solve problems
Tray paper surface sensor
ENWW