Loading And Starting The Paper Stack - HP LineJet Serie Kurzanleitung

Loading and Starting the Paper Stack

Loading and Starting the Paper Stack
1.
If the paper is not already located in the print mechanism, go to
"Loading Paper" on page 32.
2.
Make sure the printer is offline. If it is not, then press ON LINE
and take the printer offline.
3.
Using the rear control panel, press the STACKER UP key and
wait for the paper guide to reach the top of its travel.
4.
Press the PAPER ADVANCE key and hand feed the paper
until paper reaches the wire tent and there is an excess of 3-5
pages. Be certain the paper passes through the paper stacker
throat.
73