Top (Top-Of-Page) Sensor (Sr9); Figure 2-4 Test The Top Sensor - HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung

Top (top-of-page) sensor (SR9)

1. Open the cartridge door, and then remove the toner cartridge.
2. Raise the registration shutter.
3. Use a small screwdriver to activate the top sensor.
Figure 2-4
4. Check the control-panel display for sensor response.
5. If there is no response, replace the sensor.
114 Chapter 2 Solve problems
Test the top sensor
ENWW