Preboot Menu Options - HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung

Preboot menu options

If an error occurs while the product is initializing, an error message displays on the control-panel
display. The user can open the Preboot menus. The error menu item will not be seen if an error did not
occur.
CAUTION:
operating system, firmware files, and third-party files (among other files) will be completely lost. HP
does not recommend this action without contacting support first.
Open the Preboot menu
1. Turn the product on.
2. Wait for both the Ready and Attention LEDs to illuminate and then dim out. The HP logo will
appear on the control panel display.
3.
When the LEDs illuminate again, press the
NOTE:
are illuminated, is around one second. You might need to press the
while the product is starting up to make you sure you gain access to the Preboot menu.
4. Use the Down arrow button to navigate the Preboot menu options.
5.
Press the
Cold reset using the Preboot menu
1. Open the Preboot menu.
a. Turn the product on.
b. Wait for both the Ready and Attention LEDs at the bottom right side of the control panel to
illuminate and then dim out. The HP logo will appear on the control panel display.
c. When the Ready and Attention LEDs illuminate again, press the
control panel.
NOTE:
Attention LEDs are illuminated, is around one second. You may need to press the
button repeatedly while the product is starting up to make you sure you gain access to the
Preboot menu.
d. Use the Down arrow button to navigate the preboot menu options.
e.
Press the
2. Select the 3 Administrator item, and then press the
3. Select the 8 Startup Options item, and then press the
ENWW
The 2 Format Disk option performs a disk initialization for the entire disk. The
The period of time for opening the Preboot menu, while the Ready and Attention LEDs
OK button to select a menu item.
The period of time for accessing the preboot menu, while the Ready and
OK button to select a menu item.
Stop button on the control panel.
OK button.
OK button.
Stop button repeatedly
Stop button on the
Stop
Preboot menu options
89