Figure 2-28 Tray 4 Paper Feed Sensor - HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung

3.
Check the control-panel display for sensor response.
4.
If there is no response, replace the sensor.
Tray 4 paper feed sensor (PS3302)
1. Remove Tray 4 from the HCI.
2. Place a business card between the feed roller and the separation roller as far as it will go to
activate the feed sensor.
Figure 2-28
3. Check the control-panel display for sensor response.
4. If there is no response, replace the sensor.
Tray 4 door open sensor (SW3301)
1.
Open the HCI right door.
140 Chapter 2 Solve problems
Tray 4 paper feed sensor
ENWW