Internal Test Pages; Clean The Paper Path; Set Up An Auto Cleaning Page - HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung

Internal test pages

Clean the paper path

1.
At the product control panel, press the Home
2. Open the following menus:
Device Maintenance
●
Calibration/Cleaning
●
Print Cleaning Page
●
3. The cleaning process can take several minutes. When it is finished, discard the printed page.

Set up an auto cleaning page

Use the procedure in this section to set up an automatic cleaning page.
1.
At the product control panel, press the Home
2.
Open the following menus:
Device Maintenance
●
Calibration/Cleaning
●
Auto Cleaning
●
3. Select the Enabled item, and then press the
4. Scroll to the Cleaning Interval option, and then press the
5. Scroll to the correct interval value, and then press the
6. Scroll to the Auto Cleaning Size option, and then press the
7. Scroll to the correct paper size option, and then press the
8.
Press the Home
174 Chapter 2 Solve problems
button to return the product to the ready state.
button.
button.
OK button.
OK button.
OK button.
OK button.
OK button.
ENWW