General Print Settings Menu - HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung

Table 2-39 General Settings menu (continued)
First level Second level
Quick Copy Job
Held Timeout
Quick Copy Job
Storage Limit
Default Folder
Name
Enable Retrieve
from USB
Hold Off Print
Job
Restore Factory
Settings

General Print Settings menu

To display: At the product control panel, open the Administration menu, and then open the
General Print Settings menu.
In the following table, asterisks (*) indicate the factory default setting.
ENWW
Third level Fourth level Values Description
Off*
Sets a maximum
storage-time limit for
1 Hour
stored Quick Copy
and Proof and Hold
4 Hours
jobs. If a stored job
is not printed during
1 Day
this period, it is
deleted.
1 Week
1-100 Configure global
settings for jobs that
Default = 32
are stored in the
product memory.
The Quick Copy
Job Storage Limit
feature specifies the
number of Quick
Copy and Proof and
Hold jobs that can
be stored on the
product. The
maximum allowed
value is 100.
Type the name for
the stored jobs folder
that is accessible to
all users.
Enabled
Enables the product
to open a file from a
Disabled*
USB device.
Enabled
Use this setting to
prevent network print
Disabled*
jobs from starting
within a specified
period after a job is
completed.
Cancel Use this setting to
restore all product
Reset
settings to their
factory defaults.
Tools for troubleshooting
185