Table 2-40 General Print Settings Menu - HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung

Table 2-40 General Print Settings menu
First level
Manual Feed
Courier Font
Wide A4
Print PS Errors
Print PDF Errors
Personality
PCL
186 Chapter 2 Solve problems
Second level
Form Length
Values
Enabled
Disabled*
Regular*
Dark
Enabled
Disabled*
Enabled
Disabled*
Enabled
Disabled*
Auto*
PCL
POSTSCRIPT
PDF
Range: 5 – 128
Default = 60
Description
Use to enable or disable the
manual-feed feature, which
allows the user to feed paper
into the product by hand. When
this feature is enabled, the user
can select manual feed from the
control panel as the paper
source for a job. If a tray is not
specified as part of a job,
manual feed is selected.
Select which version of the
Courier font you want to use. The
factory default setting is
Regular, which uses an
average stroke width. The Dark
setting can be used if a heavier
Courier font is needed.
Changes the printable area of
A4-size paper. If you enable this
option, eighty 10-pitch
characters can be printed on a
single line of A4 paper.
Use this feature to select whether
a PostScript (PS) error page is
printed when the product
encounters a PS error.
Selects whether a PDF error page
is printed when the product
encounters a PDF error.
Configures the default print
language or personality for the
product. Normally you should
not change the product
language. If you change the
setting to a specific product
language, the product does not
automatically switch from one
language to another unless
specific software commands are
sent to it.
Controls the PCL print-command
options. PCL is a set of
productcommands that Hewlett-
Packard developed to provide
access to productfeatures.
Use the Form Length feature to
select the user-soft default vertical
form length.
ENWW