Product Resets; Restore Factory-Set Defaults; Restore The Service Id - HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung

First level
Cold Reset Paper
Test Support

Product resets

Restore factory-set defaults

1.
On the product control panel, press the Home
2.
Open the following menus:
Administration
●
General Settings
●
Restore Factory Settings
●
3. Select the Reset option, and then press the

Restore the service ID

Restore the service ID
If you replace the formatter, the date is lost. Use this menu item to reset the date to the original date that
the product was first used. The date format is YYDDD. Use the following formula to calculate the dates:
1. To calculate YY, subtract 1990 from the calendar year. For instance, if the product was first used
in 2002, calculate YY as follows: 2002 - 1990 = 12. YY = 12.
2.
Subtract 1 from 10 (October is the tenth month of the year): 10 - 1 = 9.
Multiply 9 by 30: 9 x 30 = 270 or add 17 to 270: 270 + 17 = 287. Thus, DDD = 287.
●
294 Chapter 2 Solve problems
Second level
Continuous Print from USB
OK button.
Value Description
When you perform a cold reset,
the paper size that is stored in
NVRAM is reset to the default
factory setting. If you replace a
formatter board in a country/
region that uses A4 as the standard
paper size, use this menu to reset
the default paper size to A4.
LETTER and A4 are the only
available values.
button.
ENWW