Tray 4 Feed Sensor (Sr1); Figure 2-9 Tray 4 Feed Sensor - HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung

Tray 4 feed sensor (SR1)

1.
Open the lower right door.
2. Use a small flatblade screwdriver to activate the sensor.
Figure 2-9
3.
Check the control-panel display for sensor response.
4.
If there is no response, replace the optional Tray 4 assembly.
ENWW
Tray 4 feed sensor
Tools for troubleshooting
119