Replace Black Cartridge; Replace Fuser Kit; Replace Supplies - HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung

Replace Black Cartridge

Description
The black cartridge has reached the out condition.
Recommended action
Install a new toner cartridge.

Replace Fuser Kit

Description
The product indicates when the fuser kit is at its estimated end of life. The actual life remaining might be
different than the estimation. Have a replacement fuser kit available to install when print quality is no
longer acceptable.
The fuser kit does not need to be replaced now unless the print quality is no longer acceptable.
NOTE: After the fuser kit reaches its approximated end of life, the HP Premium Protection Warranty
on that fuser kit ends.
Recommended action
Replace the fuser kit.
WARNING!

Replace supplies

Description
This alert appears only if the product is configured to stop when a supplies reach the very low
threshold. Two or more supplies have reached the estimated end of life. The product indicates when a
supply level is at its estimated end of life. The actual life remaining might be different than estimated.
The supply does not need to be replaced now unless the print quality is no longer acceptable.
HP recommends that the customer have a replacement supply available to install when print quality is
no longer acceptable.
NOTE: When an HP supply has reached its approximated end of life, the HP Premium Protection
Warranty on that supply ends.
Recorded event codes depend on which supplies are at the end of life.
10.00.70 (event code): Black toner cartridge
◦
10.23.70 (event code): Fuser kit
◦
10.22.70 (event code): Transfer kit
◦
ENWW
The fuser can be hot while the product is in use.
Tools for troubleshooting
249