HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung Seite 231

Table 2-46 Jetdirect Menu (continued)
First level Second level
Ping Results
ENWW
Third level Fourth level
Timeout
Count
Print Results
Execute
Packets Sent
Packets Received
Percent Lost
Values Description
Default = 001
Specify the length of
time, in seconds, to
wait for a response
from the remote host.
The maximum is
100.
Default = 004
Specify the number
of ping test packets
to send for this test.
Select a value from 0
to 100. To configure
the test to run
continuously, select
0.
Yes
No*
Yes No: Do not initiate
the selected tests.
No*
Yes: Initiate the
selected tests.
Default = 00000 Shows the number of
packets (0 - 65535)
sent to the remote
host since the most
recent test was
initiated or
completed..
Default = 00000 Shows the number of
packets (0 - 65535)
received from the
remote host since the
most recent test was
initiated or
completed. The
default is 0.
Default = 000 Shows the percent (0
to 100) of ping test
packets that were
sent with no
response from the
remote host since the
most recent test was
initiated or
completed.
Tools for troubleshooting
205