Load Tray : [Size] To Continue, Touch "Ok; Load Tray : [Size] To Use Another Tray, Touch "Options; Load Tray : [Type], [Size] - HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung

3.
Make sure that the sensor flag on the paper presence sensor is not damaged and moves freely.
4.
Reconnect the corresponding connector:
Tray 1 (multipurpose tray): Connectors (J1) on the Tray 1 paper out sensor and the connector
●
(J41) on the DC controller PCA.
Input trays: Connectors (J15 and J7) on the tray paper out sensor and the connectors (J43,
●
J48) on the DC controller PCA.
1x500-sheet paper feeder tray: Connector (J752) on the paper feeder tray paper out sensor
●
and the connector (J2003) on the paper feeder controller PCA.
3x500-sheet paper feeder tray: Connector (J752, J852, J952) on the paper feeder tray
●
paper out sensor and the connector (J2003) on the paper feeder controller PCA.
HCI: Connector (J3201) on the paper feeder tray paper out sensor and the connector (J3005
●
or J3015) on the HCI controller PCA.
Load Tray <X>: [Size] To continue, touch "OK"
Description
This message appears when the indicated tray is selected but is not loaded, and other paper trays are
available for use. It also appears when the tray is configured for a different paper type or size than the
print job requires.
Recommended action
1.
Load the correct paper in the tray.
2.
If prompted, confirm the size and type of paper loaded.
3.
Otherwise, press the
Load Tray <X>: [Size] To use another tray, touch "Options"
Description
This message appears when the indicated tray is selected but is not loaded, and other paper trays are
available for use. It also appears when the tray is configured for a different paper type or size than the
print job requires.
Recommended action
1.
Load the correct paper in the tray.
2. If prompted, confirm the size and type of paper loaded.
3. Otherwise, press the
Load Tray <X>: [Type], [Size]
Description
This message appears even though there is paper loaded in the tray.
ENWW
OK button to select another tray.
OK button to select another tray.
Tools for troubleshooting
243