Fuser Output Sensor (Sr12); Figure 2-6 Fuser Output Sensor - HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung

Fuser output sensor (SR12)

1. Open the left door.
2. Pull down the fuser shutter, and then use a small flat-blade screwdriver to pull the sensor lever
toward you.
Figure 2-6
3. Check the control-panel display for a sensor response.
4. If there is no response, replace the fuser.
116 Chapter 2 Solve problems
Fuser output sensor
ENWW