Cartridge Ship Mode; Chosen Personality Not Available To Continue, Touch "Ok; Cleaning Disk % Complete Do Not Power Off; Close Left Door - HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung

Recommended action
Use the embedded Web server or HP Web Jetadmin to initialize the component.

Cartridge ship mode

Description
Manufacturing use only - should not be seen in field.
Recommended action
Contact HP support for steps to resolve this condition.

Chosen personality not available To continue, touch "OK"

Description
A print job requested a product language (personality) that is not available for this product. The job will
not print and will be cleared from memory.
Recommended action
Print the job by using a product driver for a different print language, or add the requested language to
the product (if possible). To see a list of available personalities, print a configuration page.
Cleaning disk <X>% complete Do not power off
Description
A storage device is being sanitized or cleaned.
Recommended action
Do not turn off the product. The product's functions are unavailable. The product will automatically
restart when finished.

Close left door

Description
The left door is open.
Recommended action
1.
Close the left door.
2. If the error persists, verify the J35 connector is fully seated on the DC controller PCA.
3. Use the manual sensor test to verify the left-door sensor functionality. If necessary, replace the
sensor.
ENWW
Tools for troubleshooting
235